Base appliance case typically used as a dishwasher enclosure. Order at 25 1/2" wide to achieve a 24" wide standard dishwasher opening.

Simple base appliance case typically used as a wall oven or warming drawer enclosure.

Base appliance case typically used when a wider flat surface is need near the top of the opening.

Base appliance case typically used when a wider flat surface is needed near the top and bottom of the opening.

Two doors covering an open interior base cabinet. This cabinet works well to hide a washer or dryer. Use two cabinets placed side by side to house a washer and dryer in separate openings.

Base appliance case typically used when a wider flat surface is needed near the top and bottom of the opening. Includes two separate (attach on site) fillers for the left and right side of the opening. Each filler is 2" wide.

**This cabinet will have multiple seams on the face of the cabinet where the frames/fillers intersect with the cabinet face. This can be unsightly and should be covered by an overlapping trim kit whenever possible to minimize these seams.Additional fillers or a full panel (not included) may be needed to hide seams.

Simple two door cooktop base cabinet.

Base appliance case typically used when a wider flat surface is needed near the top, bottom, and the left and right sides of the opening.

Simple two door 1 false front cooktop base cabinet.

This is a wall oven base cabinet. The top of the cabinet has no stretchers which allow for the addition of a cook top over the oven. Please ensure that you review your product specs thoroughly before placing your order.

This is a wall oven base cabinet with a wide top rail and two wide stiles on each side of the appliance opening. The top of the cabinet has no stretchers which allow for the addition of a cook top over the oven. Please ensure that you review your product specs thoroughly before placing your order.

**This cabinet will have multiple seams on the face of the cabinet where the frames/fillers intersect with the cabinet face. This can be unsightly and should be covered by an overlapping trim kit whenever possible to minimize these seams.Additional fillers or a full panel (not included) may be needed to hide seams.

Base appliance case typically used as a dishwasher enclosure. One drawer above the appliance opening at standard height.

Base appliance case with an appliance opening up top, and a drawer underneath.

Base appliance case with an appliance opening up top, and a drawer underneath. This cabinet has a doubled up top rail that allows for a 1.5" tall face on the top of the appliance opening.

Base appliance case with a tip-out front at the top, mid appliance opening (adjustable height) in the middle, and a lower drawer down below.

Base appliance case with an appliance opening up top, and a drawer underneath. This cabinet has a doubled up top rail and a double up fixed sheld that allows for a 1.5" tall face on the top and bottom of the appliance opening.

Two drawer cooktop base cabinet.

Two drawer 1 false front cooktop base cabinet.

Typically ordered at 6" to 9" less HIEGHT (see your appliance specs) than the cabinets to the left and right side, this rangetop base cabinet allows seamless installation of a variety of rangetops.

Typically ordered at 6" to 9" less HIEGHT  (see your appliance specs) than the cabinets to the left and right side, this rangetop base cabinet allows seamless installation of a variety of rangetops. Be sure to reduce the depths of the drawer boxes (drop down option available) to allow room for gas lines and electrical wiring.